Originally created as a one-off bespoke commission, this Elizabeth II Royal Crown & Pennant Weathervane demonstrates some of the most detailed architectural weathervane work undertaken by Black Forge Art.
Featuring Queen Elizabeth II’s EIIR Royal Cypher, an elaborate crown, traditional pennant, decorative scrollwork and substantial NSEW direction arms, the finished piece measures approximately 850mm wide × 1200mm high.
Extensive genuine 23ct gold leaf is applied to the entire crown inside and out, the EIIR Royal Cypher, all four NSEW direction letters and the traditional arrowhead, creating a striking contrast against the black powder-coated structure.
Originally Created as a Bespoke Commission
This weathervane was individually designed and handmade by Black Forge Art as a bespoke commission.
We have included it within our collection as a showcase of the scale, detail and level of craftsmanship we can offer when creating more unusual architectural weathervanes.
The design can be made again to order in the specification shown, or we can use it as inspiration for another commissioned piece incorporating different details, proportions, finishes or mounting arrangements.
Contact us to discuss this weathervane or your own bespoke commission
Dimensions
This is a substantial architectural weathervane designed to create an impressive feature when installed.
- Overall width: approximately 850mm
- Overall height: approximately 1200mm
As each example would be individually handmade, dimensions may vary slightly from those stated or can be altered where required for a particular project.
Extensive 23ct Gold Leaf Finish
One of the defining features of this commission is the extensive use of genuine 23ct gold leaf throughout the design.
Gold leaf is individually applied by hand to:
- The entire crown – inside and out
- Queen Elizabeth II’s EIIR Royal Cypher
- All four NSEW direction letters
- The traditional arrowhead
This is considerably more than a simple decorative highlight. The extensive gilding forms an important part of the overall design, creating the rich contrast between the black structure and gold Royal detailing seen in the photographs.
Because genuine gold leaf is individually applied by hand, subtle variations in the surface and finish are a natural characteristic of this traditional process.
The listed specification and price include the extensive 23ct gold leaf application shown.
Alternative Finishes
The same design can be produced at a lower cost with the highlighted areas finished in gold paint rather than genuine 23ct gold leaf.
Alternatively, it can be supplied entirely in our black powder-coated finish without any gold detailing.
Contact us for prices and alternative finish options
Handmade Architectural Metalwork
This design involves considerably more fabrication than one of our standard weathervanes. The crown, Royal Cypher, pennant, scrollwork, direction arms and supporting framework are individually manufactured and assembled in our Kent workshop.
The main structure and working components are manufactured from stainless steel. The central cast spheres and traditional cast arrowhead are forged mild steel.
The completed structure is carefully prepared before being etched, primed and powder coated black, followed by the extensive hand application of genuine 23ct gold leaf.
- Stainless steel main construction
- Forged mild-steel cast spheres and arrowhead
- Fully functional rotating pennant
- Ball-bearing rotation mechanism
- Queen Elizabeth II EIIR Royal Cypher
- Elaborately fabricated crown
- Traditional NSEW direction arms
- Hand-formed decorative scrollwork
- Extensive genuine 23ct gold leaf finish
- Etched, primed and powder-coated black
Despite its highly decorative appearance, this remains a fully functional wind direction indicator, with the pennant rotating freely around the central spindle and ball-bearing mechanism.
Made in Our Kent Workshop
Every element of a commission such as this is carefully fabricated, welded, assembled and finished by our experienced metalworkers.

Combining traditional metalworking with modern stainless steel fabrication allows us to create complex architectural weathervanes while retaining the strength and functionality required for permanent outdoor installation.
Mounting & Alternative Fixings
The specification shown is supplied with a substantial base stand designed for fixing to a flat surface or plinth.
Alternative mounting arrangements can be manufactured for locations including:
- Roofs and ridgelines
- Towers
- Cupolas
- Architectural plinths
- Existing steelwork or structures
- Other bespoke mounting locations
For a commissioned architectural weathervane, we are happy to discuss the intended location before manufacture and can work from photographs, measurements, drawings or details of the existing structure.
Contact us to discuss the most suitable mounting arrangement
Made by Black Forge Art Since 1989
Black Forge Art has been making weathervanes and bespoke metalwork since 1989. Our larger architectural weathervanes combine traditional metalworking with modern stainless steel fabrication, allowing us to create substantial and highly detailed pieces for prominent buildings and unusual locations.
Our work ranges from individual house weathervanes to large bespoke commissions, architectural metalwork, signs and public art.
Every commissioned weathervane is individually fabricated, assembled and checked before leaving our workshop.
Bespoke Architectural Weathervanes
This commission is just one example of what can be created.
We can design and manufacture completely bespoke architectural weathervanes around a particular building, subject, idea or architectural style.
Designs can incorporate traditional scrollwork, decorative crowns, pennants, lettering, symbols, animals, aircraft, vehicles and other individually designed elements. We can also consider special finishes such as genuine gold leaf.
For larger commissions, we can work from photographs, sketches, measurements or architectural drawings to develop a design suited to the intended location.
Create Your Own Bespoke Weathervane
Ordering & 25% Deposit Option
The design shown can be made again to order, with the listed price based on recreating the specification and extensive genuine 23ct gold leaf finish shown.
For commissioned pieces of this nature, an order can be confirmed with a 25% deposit, with the remaining balance due once the weathervane has been completed.
Alternatively, the product can be ordered directly through our website and paid for in full.
If you would like to alter the design, finish or mounting arrangement, please contact us before ordering so that we can discuss the requirements and confirm the price.
Contact us to discuss this weathervane or your own commission
15-Year Guarantee
A weathervane made to this specification is covered by our 15-year guarantee on the stainless steel structure and manufactured components.
Please note that the central cast spheres and cast arrowhead are manufactured from forged mild steel and are therefore excluded from any stainless steel rust-free guarantee.
See our Terms & Conditions for full details.
Lead Times
A commission of this nature involves considerably more fabrication, finishing and hand-applied gold leaf than our standard weathervanes.
Lead time will therefore depend on our current workshop schedule, the chosen finish and any alterations required to the original design or mounting arrangement.
If your project has a particular installation date or programme, contact us and we’ll confirm what is possible.
Returns
As recreated or altered versions of this design are individually made to order, please discuss any required changes, dimensions, finish or mounting arrangements with us before confirming your commission.
Your statutory rights remain unaffected. See our Returns Policy for full details.
Black Forge Art — Crafting handmade weathervanes and architectural metalwork since 1989.
01797 270073
Facebook



















Reviews
There are no reviews yet.